14
English
MAINTENANCE CONTINUED
To Lubricate The Air Tool Manually:
1. Remove any attachments on the air tool.
2. Disconnect the tool from the air supply source, place
the air inlet face up.
3. Depress the trigger and place about 1 teaspoon
(5cc.) of air tool oil into the air inlet. (Depressing the trigger
will help circulate oil in the motor.)
NOTE: Use SAE #10 weight oil if air tool oil is not available.
4. Connect the tool to an air source, cover the exhaust end
with a towel and run for about 20 to 30 seconds.
WARNING: Keep out of the reach of children. If taken internally, do
not induce vomiting, call a doctor immediately.
WARNING: Anyexcessoilinthemotorisimmediatelyexpelled
fromtheexhaustport.Alwaysdirectexhaustportawayfrompeople
or objects.
Storage:
The air tool must be lubricated before storing.
Follow the “Lubrication” instruction with exception of step 4.
SERVICE INFORMATION
Please have the following information available for all service calls:
Model Number ________________________________________
Date and Place of Purchase ______________________________
FULL THREE YEARS WARRANTY
DeWALT heavy duty industrial tools are warranted for 3 years from
date of purchase. We will repair, without charge, any defects due
to faulty materials or workmanship. For warranty repair information,
call 1-800-4-D
e
WALT. This warranty does not apply to accessories
or damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
Latin America: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, see country
specific warranty information contained either in the packaging, call
the local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
e
WALT
for a free replacement.
To Next Page
Loading...
Need help?
General
