ENGLISH
3
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
BELT SANDER
DWP352VS
DEWALT declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4.
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
DWP352VS
Voltage V 230 115
Type 1/2 1/2
Power input W 1010 1010
Belt speed m/min 270–440 235–380
Sanding surface mm 140 x 75 140 x 75
Belt length mm 533.4 533.4
Belt width mm 76.2 76.2
Weight kg 5.0 5.0
Noise values and vibration values (triax vector sum) according to
EN60745-2-4:
L
PA
(emission sound
pressure level) dB(A)
92 92
L
WA
(sound power level) dB(A)
103 103
K
WA
(uncertainty for the
given sound level) dB(A)
3 3
Vibration emission value a
h
=
m/s²
2.7 2.7
Uncertainty K = m/s²
1.5 1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
BELT SANDER
DWP352VS
To Next Page
Loading...
Need help?
General
