DeWalt DWS774 User Manual

22
CROSS CUT MITRE SAW
DWS773, DWS774
TECHNICAL DATA
DWS773 DWS774
Voltage:
Europe V 230 230
U.K. & Ireland V 230/115 230/115
Fuses:
Europe
230 V
A
10
(mains)
10
(mains)
U.K. & Ireland
230 V
A
13
(in plugs)
13
(in plugs)
U.K. & Ireland
115 V
A
16
(mains)
16
(mains)
Type 1 1
Power input W 1300 1400
Blade diameter mm 216 216
Blade bore mm 30 30
Blade speed, max. min
-1
4600/4500 4600/4500
Mitre positions, max.
left
right
48°
48°
48°
48°
Bevel position, max. left 48° 48°
Compound mitre
bevel
mitre
45°
45°
45°
45°
Capacities:
cross-cut 90° (max height) mm 70 x 20 70 x 20
cross-cut 90° mm 60 x 250 60 x 250
mitre 45° mm 60 x 170 60 x 170
mitre 48° mm 60 x 160 60 x 160
bevel 45° mm 48 x 250 48 x 250
bevel 48° mm 45 x 250 45 x 250
Overall dimensions(with table extensions) mm 625 x 425 x 355 625 x 425 x 355
Dimensions(without table extensions) mm 445 x 425 x 355 445 x 425 x 355
Weight kg 11.5 11.5
L
PA
(sound pressure) dB(A) 92 92
L
WA
(acoustic power) dB(A) 98 98
K (acoustic power uncertainty) dB(A) 0,3 0,3
Vibration total values (triax vector sum) determined according to EN 61029:
ah (vibration emission value) m/s
2
2,7 2,7
K (uncertainty) m/s
2
1.5 1.5
XPS No Yes
Vibration Emission
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841-3-9
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the main applications
of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the operator from the
effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Electrical Power Source
This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0,39 Ohm at the
interface point (power service box) of user’s supply.
The user has to ensure that this device is connected only to a power
system which fulfils the requirement above. If necessary, the user can
ask the public power supply company for the system impedance at the
interface point.
EC-Declaration of Conformity
In accordance with
Machinery Directive 2006/42/EC
Product: Cross-cut Mitre Saw
Types: DWS773, DWS774
DEWALT declares that these products described under Technical Data
are in compliance with the harmonized standards: EN 62841-1:2015 and
EN 62841-3-9:2015. These products also comply with Directive 2014/30/
EU and 2011/65/EC.
For more information, please contact DEWALT at the following address
or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of DEWALT.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
30.11.2015
GENERAL SAFETY NOTES
Read the safety manual carefully before use in order to
ensure asafe and proper operation of the device. Retain
the instruction manual until the product is disposed of.
Intended Use
The Cross-Cut Mitre Saw has to be used in accordance with the
specifications of this safety manual and the operational manual. Mitre
Saw are not “toys” and require prudent, responsible and careful handling.
The Mitre Saw has been designed for professional cutting wood, wood
products and plastics. It performs the sawing operations of cross-cutting,
bevelling and mitring easily, accurately and safety.
The Mitre Saw is designed for use with a nominal blade diameter
216mm carbide tip blade.
Responsibilities of the employer, for example:
• Complying with the deadlines for periodic inspections as well as
ordering repair measures to be performed by by an authorized
DeWALT
repair agent.
• Safe storage of the Mitre Saw out of reach of children.
• Provisioning and ensuring the usage of protective equipment, see
chapter 1.3 “Personal Protective Equipment”.
ENGLISH

DeWalt DWS774 Specifications

General

Input power	1400 W
Output power	1100 W
Power source	AC
Blade bore	30 mm
Blade diameter	216 mm
Idle speed (max)	4500 RPM
Sound power level	104 dB
Cutting depth (90º)	70 mm
Sound pressure level	93 dB
Sound level uncertainty	3 dB
Cross cut capacity (0° x 0°)	250 x 62 mm
Bevel cut capacity (0° x 45°)	173 x 62 mm
Miter cut capacity (45° x 0°)	177 x 62 mm
Compound cut capacity (45° x 45°)	190 x 48 mm
Saw blade included	Yes
Diamond disc	-
Uncertainty K	1.5 m/s²
Vibration emission	2.1 m/s²

Weight and Dimensions

Depth	550 mm
Width	490 mm
Height	590 mm
Weight	12000 g