9
ENGLISH
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for the
environment.
Charge
battery packs only with designated
chargers. Charging battery packs other
than the designated
batteries with a
charger may make them burst or lead to
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3batteries of 36 Wh).
Battery Type
The DCF622 operates on an 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB546. Refer to
Technical Data for moreinformation.
Package Contents
The package contains:
1 Cordless self-drilling screwdriver
1 Li-Ion battery pack (C1, D1, M1, P1, S1 models)
2 Li-Ion battery packs (C2, D2, M2, P2, S2 models)
3 Li-Ion battery packs (C3, D3, M3, P3, S3 models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
Date Code Position (Fig. A)
The date code
13
, which also includes the year of manufacture,
is printed into thefoot of the tool housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A, C)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
6.35 mm hex quick-change chuck
2
Quick-change sleeve
3
Adjustment collar
4
MAX/MIN adjustment range
5
Clutch collar
6
Forward/reverse control lever
7
Variable speed trigger switch
8
Lock-on button
9
LED worklight
10
Battery release button
11
Battery pack
12
Belt hook
13
Date code
14
Fuel gauge
Intended Use
Your self-drilling screwdriver has been designed for driving
self-drilling fasteners in metal-to-metal roofing or sheeting
applications.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This self-drilling screwdriver is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
To Next Page
Loading...
Need help?
General
