DeWalt XR DCF901 User Manual

ENGLISH
3
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
EC‑Declaration of Conformity
Machinery Directive
12V Cordless Impact Wrench
DCF901, DCF903
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1‑2015 +AC:2015, EN62841‑2‑2 +AC:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
05.01.2021
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCF901 DCF903
Voltage V
DC
12 12
Type
1 1
Battery type
Li‑Ion Li‑Ion
No load speed min
‑1
2850 2850
Impact rate min
‑1
3250 3250
Max torque Nm 340 340
Tool holder mm 13 10
Weight (without battery pack) kg
1.0 1.0
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑2:
L
PA
(emission sound pressure level)
dB(A) 89 89
L
WA
(sound power level)
dB(A) 100 100
K (uncertainty for the given sound
level)
dB(A) 3 3
Vibration emission value a
h
=
m/s
2
16.5 16.5
Uncertainty K = m/s
2
2.5 2.5
Congratulations!
You have chosen a USAGDeWALT tool. Years of experience,
thorough product development and innovation make
USAGDeWALT one of the most reliable partners for professional
power toolusers.
Technical Data
English (original instructions)
12V CORDLESS IMPACT WRENCH
DCF901, DCF903

DeWalt XR DCF901 Specifications

General

Brand	DeWalt
Model	XR DCF901
Category	Power Tool
Language	English