DeWalt XR Li-Ion DCF902D2 User Manual

ENGLISH
5
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
workpatterns.
EC-Declaration of Conformity
Machinery Directive
Sub-Compact Impact Driver
DCF801
Sub-Compact Impact Wrench
DCF902
DEWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
EW A LT a t
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofD
EW A LT .
Markus Rompel
Vice-President Engineering, PTE-Europa
D
EWALT , Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
21.01.2019
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates apotentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates apotentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
Congratulations!
You have chosen aDEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCF801 DCF902
Voltage V
DC
12 12
Type 1 1
Battery type Li-Ion Li-Ion
Power output W 200 200
No-load speed
Precision Mode
Lo Mode
Hi Mode
min
-1
min
-1
min
-1
0–950
0–1950
0–2850
0–2850
0–1000
0–2850
Impact rate min
-1
0–3600 0–3600
Max. torque Nm 163 168
Tool holder mm 6.35 3/8"/9.5
Weight (without battery pack) kg 0.8 0.8
Noise values and vibration values (triax vector sum) according to EN62841-2-2:
L
PA
(emission sound pressure level) dB(A) 90 90
L
WA
(sound power level) dB(A) 101 101
K (uncertainty for the given sound
level)
dB(A) 3 3
Vibration emission value a
h
= m/s
2
6.7 7.8
Uncertainty K = m/s
2
1.5 1.8
The vibration emission level given in this information sheet has
been measured in accordance with astandardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for apreliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents impact tightening of fasteners of the maximum
capacity of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
SUBCOMPACT IMPACT DRIVER
DCF801
SUBCOMPACT IMPACT WRENCH
DCF902
Autogoods “130”
130.com.ua

DeWalt XR Li-Ion DCF902D2 Specifications

General

Brand	DeWalt
Model	XR Li-Ion DCF902D2
Category	Impact Driver
Language	English