DeWalt XR LI-ION DCS334P2 User Manual

ENGLISH
5
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Cordless Jigsaw
DCS334, DCS335
DeWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-11:2016.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT
.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
23.05.2018
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DCS334 DCS335
Voltage V
DC
18 18
Type 1 1
Battery type Li-Ion Li-Ion
No-load speed min
-1
0–3200 1000–3200
Stroke length mm 26 26
Cutting depth in:
wood mm 135 135
aluminum mm 25 25
steel mm 10 10
Bevel angle adjustment (l/r) ˚ 0–45 0–45
Weight (without battery pack) kg 2.1 2.0
Noise values and vibration values (triax vector sum) according to EN62841-2-11:
L
PA
(emission sound pressure level) dB(A) 84 86
L
WA
(sound power level) dB(A) 95 97
K (uncertainty for the given sound
level)
dB(A) 3 3
While cutting board
Handle
Vibration emission value a
h,B
= m/s
2
7.0 5.3
Uncertainty K = m/s
2
1.5 1.5
Head
Vibration emission value a
h,B
= m/s
2
– 13.3
Uncertainty K = m/s
2
– 3.6
While cutting sheet metal
Handle
Vibration emission value a
h,M
= m/s
2
5.8 5.1
Uncertainty K = m/s
2
1.5 1.5
Head
Vibration emission value a
h,M
= m/s
2
– 8.1
Uncertainty K = m/s
2
– 2.3
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
English (original instructions)
CORDLESS JIGSAW
DCS334, DCS335

DeWalt XR LI-ION DCS334P2 Specifications

General

Brand	DeWalt
Model	XR LI-ION DCS334P2
Category	Power Tool
Language	English