DR5088RC DIGIDETECT 30.05.2019
P 3
www.digikeijs.com
1.1 Index
1.0 General informaon 2
1.1 Index 3
1.2 Warranty provisions 4
1.3 Legal nocaon 4
2.0 Product overview 5
2.1 General informaon 6
2.2 Technical specicaons 6
2.3 Hardware overview 7
2.4 LNCV values 8
3.0 Conguraon Soware 9
3.1 Introducon and minimum system requirements 10
3.2 Soware download 11
3.3 Soware Installaon 12
3.4 Connecng DR5088RC 14
3.5 Soware overview 15
3.6 Restoring Factory Sengs 16
3.7 Soware and Firmware update 17
3.8 Firmware versions 18
4.0 Conguraon opons 19
4.1 Detector 1– 8 + 1 - 16 features 20
4.2 Global Detector features 21
4.3 Properes Loconet 22
4.4.1 Module Properes Part 1 23
4.4.2 Module Properes Part 2 24
4.5 USB 2.0 Features 25
4.6 Railcom feedback monitor 26
4.7 Scripng 27
5.0 Addressing 28
5.1 Address principle 29
5.2 Programme addresses through the buon method 30
5.3 Randomly program addresses via USB 31
6.0 Connecon examples 32
6.1 DR5088RC in conjuncon with the DR5000 33
6.2 Expanding the DR5088RC with DR4088LN
feedback modules 34
6.3 DR5088RC in combinaon with the
Booster DR5033 35
7.0 Connecon to control soware 32
7.1 iTrain® 33
7.2 Train controller® 34
7.3 Rocrail® 35
7.4 EStWGJ® 36
7.5.1 Windigipet® 2015
7.5.2 Windigipet® 2018
Base Manual
This manual currently contains most of the basic informaon and is being
gradually extended. Suggesons, improvements, addions, comments or
suggesons are always highly appreciated.
support@digikeijs.com