Bluetooth Function
1. Switch on the unit, press MODE to Bluetooth function. The Bluetooth LED indicator ”BLUE” will be flashing.
2. Activate the Bluetooth function in your Bluetooth device.
3. Select “AR1692” on your Bluetooth device for pairing. The Bluetooth LED indicator ”BLUE” will light on, and the
speakers will have a pop sound to confirm if you success connect with your Bluetooth device.
4. Start music play on your Bluetooth device. After connected, you can control the playback, pause, next, previous
function by both the Bluetooth device orthe radio directly.
5. Press PROG button for 3 second to disconnect the pairing of Bluetooth function. The Bluetooth LED indicator
will be flashing after pairing disconnected.
Tips:
The device will be disconnected when the device is moved beyond the operational range. If you want to reconnect
the device to the unit, place it within the operational range.
Note:
The operational range between this unit and a Bluetooth device is approximately 10 meters. Any obstacle between
this unit and a Bluetooth device can reduce the operational range.
Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device.
Compatibility with all Bluetooth devices is not guaranteed.
Keep this unit away from any other electronic device that may cause interference.
SPECIFICATIONS
Rechargeable Battery: 3.7V Li-ion 18650, 1,500mAh
Speaker: 3”, 8Ω Dynamic
Power Output: 1.4W RMS
Dimensions: 190(W) x 118(H) x 70(D)mm
PRECAUTIONS:
1. For AC operation, make sure the voltage is compatible. Always use the supplied AC power cord; never use other
AC power cord.
2. Always disconnect the AC power cord from the AC power source when it is not in use.
3. Do not leave the batteries in the compartment for a long time. Remove the batteries to avoid leakage and
damage.
4. Do not expose the unit to extreme temperature nor high humidity to ensure normal functioning for a long
lifetime. For instances, never place the unit in bathing areas nor around stoves and radiators.
5. If you find the unit is not working properly, please take it to your nearest services center. Do not attempt to repair
by yourself.
WARNING :
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet, refer to service agent or qualified engineer only.
To Next Page
Loading...
Need help?
General
