DigiTech BASS DRIVER User Manual

The Bass Driver Distortion is the world’s most advanced overdrive
pedal designed specifically for bass. DigiTech’s exclusive AudioDNA™
technology is what makes the Bass Driver more than a standard
overdrive stompbox. Rather than working with a single distortion
circuit, the Bass Driver features a Morph knob that blends three totally
distinct overdrive and distortion types. You now get a wide variety of
overdrive sounds that can be dialed in quickly and easily.
1. Level Knob
Controls the effect’s output level. Turn this knob clockwise to increase
the output level, and counter-clockwise to decrease the output level.
2.Tone Knob
Controls the boost or cut of high frequencies. Turn this knob clockwise
to increase the high frequency content, and counter-clockwise to
decrease the high frequency content.
3.AC Adapter Jack
Connect a DigiTech PS200R power supply to this jack. Use the proper
supply for your area’s Mains line voltage.

DigiTech BASS DRIVER Specifications

Power

power supply	9V Alkaline Dry Battery
power consumption	4.8 Watts
battery life	Approximately 4 hours

Impedance

input impedance	1 MOhms
output impedance	100 Ohms
optional power supply	PS200R - 100 (100V ~ 50/60Hz), PS200R - 120 (120V ~ 60Hz), PS200R - 230 (230V ~ 50Hz), PS200R - 240 (240V ~ 50Hz)

Weight and Dimensions

dimensions	4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H)
weight	1.38 lbs