DigiTech HARDWIRE DL-8 User Manual

3
What Does This Do?
1. Level Knob - Controls the delay level. Turn this knob clockwise to
increase and counter-clockwise to decrease the delay level. When
Reverse Delay is selected, dry signal is not heard and this knob controls
the output level of the Reverse delay effect.
2. DC Adapter Jack - Connect the optional Harman power supply to
this jack. Use the proper supply for your area’s mains line voltage.
3. Repeats Knob - Controls the number of delay repeats. Turn this
knob clockwise to increase and counter-clockwise to decrease the
number of repeats. Turn this knob to the maximum position to
engage the repeat-hold of the delay signal (except for MODULATED,
ANALOG, LO FI, SLAPBACK, and TAPE types). This knob is disabled
when LOOP is selected.

DigiTech HARDWIRE DL-8 Specifications

General

Brand	DigiTech
Model	HARDWIRE DL-8
Category	Recording Equipment
Language	English