10
Select A Display Mode
The HT-2 has two different display modes – Strobe and Normal.
When Strobe mode is selected, the tuning LED’s move in the direction of the
input note’s tuning. If the note is flat, the LED’s move to the left indicating the
note needs to be tuned up. If the note is sharp, the LED’s move to the right
indicating the note needs to be tuned down. How fast the LED’s move indicates
how far out of tune the note is. The speed will gradually slow down as the note
is tuned. When the note is in tune, the cycling LED’s turn off and only the center
blue LED is lit.
To Next Page
Loading...
Need help?
General