Problem
Solution
Move the display console around
electrical
noise
generating
devices, such
ascomputers,
TVs and other wireless
transmitters or
receivers.
Move the remote sensor to a higher location.
Move the remote sensor to a
closer
location
Temperature sensor
reads
too high in the
day time.
Make sure the thermo-hygrometer is
mounted
in a shaded area
on the north facing
wall-
lndoor and Outdoor
Temperature do not
agree
Allow up to one hour for the sensors to
stabilize
due
to signal filtering. The indoor and
outdoor temperature sensors
should
agree
within 2
"C
(the
sensor accuracy is t 1
"C).
Use the
calibration
feature to match the indoor
and outdoor temperature to a
known
source.
lndoor
and
Outdoor
Humidity do not
agree.
Allow
up
to one hour for the sensors to
stabilize
due
to signal filtering.
The
indoor and
outdoor humidity sensors should agree within
1 0
%
(the
sensor
accuracy is r 5 %).
Use the calibration feature to match the lndoor
and outdoor humidity to a known source.
Display console
contrast is weak
Replace console batteries
with a fresh set of
batteries.
To Previous Page
Loading...
Need help?
General
