Dini Argeo 3590EGT8 User Manual

3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator E-AF09_02_16.03_EN_U
5
2. MAIN TECHNICAL SPECIFICATIONS
POWER SUPPLY
3590E:
- 12 ÷24 Vdc ( 12Vdc with internal adapter)
- 6 Vdc from rechargeable built-in battery, fitted depending on the model.
CPWE - CPWET
- 12 ÷ 24 Vdc
MAXIMUM POWER
16 VA.
OPERATING TEMPERATURE
From -15 to +40 °C.
CONVERTER
24 bit Sigma Delta.
CONVERSION SPEED
200 conv./sec with automatic selection.
RANGE OF INPUT SIGNAL
0,6 mV/V - 3,2 mV/V.
MINIMUM VOLTAGE PER DIVISION
0.3 V (approved instrument); 0.03 V (non-approved instrument).
AUTOMATIC ZERO DETECTION
Only in gross mode, programmable at +/- ¼, ½, 1, 2 divisions.
ZERO RANGE
Configurable up to +/- 50% of max load capacity.
AUTO ZERO AT START-UP
Configurable up to +/- 50% of max load capacity.
LOAD CELL POWER SUPPLY
5Vdc ± 5%, 120mA (max 8 350-Ohm cells).
LOAD CELL CONNECTIONS
6 wires with Remote Sense.
DISPLAY DIVISIONS
10000e, 3 x 3000e for legal for trade weighing, expandable up to 800.000 for
internal use (with minimum signal coming from the 1,6 mV/V cell).
DISPLAYS
3590E:
- Red, high-luminosity LED indicators, with six digits (h 13 mm).
- Back lit graphic 160x32 dot LCD.
CPWE: Back lit graphic 160x32 dot LCD.
DATABASE/MEMORY
Database of 500 customers (3 descriptions of 20 characters).
Database of 500 products (2 descriptions of 20 characters).
Database of 500 vehicles (description of 20 characters, plate of 10 characters,
linked tare).
SIGNALS
3590E: 16 status LEDs. Graphic icons on LCD display.
CPWE: Graphic icons on LCD display.
CPWET: 3-way control light. Graphic icons on LCD display
KEYBOARD
Impermeable polycarbonate keyboard with 24 multifunction (IP65 protection
degree), with membrane keys with audible and tactile feedback.
PARAMETER SETUP
Calibration and linearity (up to 8 points), fully digital and programmable from the
keyboard or from PC with Dinitools ™.
CLOCK/DATE
Fitted, with buffer RAM.
SERIAL OUTPUTS
- 2 input/output RS232 ports on terminal board/ amp connector.
- 1 input/output RS485 port on terminal board or RS232 on amp connector.
- Management of PC keyboard or barcode reader
INPUTS AND OUTPUTS
3590EXP, 3590EXT and CPWET:
- 2 optoisolated inputs (optoisolated photo couplers), 12Vdc – 24Vdc, 20mA max
- 4 outputs (optoisolated photomosfets), 48Vac / 0.15A, 60Vdc / 0.15A, 10 Ω
max.
3590EXT (in IO version) and CPWE:
- 8 inputs (optoisolated photo couplers), 12Vdc – 24Vdc, 20mA max.
- 16 outputs (optoisolated photomosfets), 48Vac / 0.15A, 60Vdc / 0.15A.
ANALOGUE OUTPUT (Option
available on the 3590EXT in IO version
and CPWE version)
- 16-bit analogue output configurable from keyboard (full-scale value; zero scale
value and minimum value) from 0 to 10 Vdc, from 0 to 20mA or from 4 to 20mA;
the maximum resistance applicable on the output current is 350 Ohm and the
minimum resistance applicable on the output voltage is 10 kohm.

Dini Argeo 3590EGT8 Specifications

General

Brand	Dini Argeo
Model	3590EGT8
Category	Accessories
Language	English