9
EN
Toilets
➤ Drain the potable tank.
➤ Empty the holding tank.
➤ Add potable-water antifreeze to the freshwater tank.
➤ Flush the potable-water antifreeze and water mixture through the toilet and into the entire
plumbing system. Each installation is different, so amounts may vary. User discretion is
required to assure adequate protection.
➤ Turn off power to the toilet and all other vacuum system components.
➤ Empty the holding tank of any remaining contents.
5 TROUBLESHOOTING
5.1 Toilet base assembly
9
Sealing Grommet
Check Valve
Electric Water Valve
Filter Screen
Driver Arm
Circuit Board
Rotor Sha Cam
Flush Spring
Linkage
Service Mode
Toggle Switch
(alternate location
on some models)
Bowl Seat
Flush Ball Seat
Retaining Ring
Cam Switch
Flush Ball
To Next Page
Loading...
Need help?
General
