Dometic RML9330 User Manual

EN
Troubleshooting RML93xx
34
Displayed faults and signal tone (RML9331 and RML9335 only)
Faults are indicated by the flashing of individual buttons on the control panel, a beep
or a combination of both.
Display Problem Suggested remedy
With AC operation:
and flashing, a
beep is emitted for
20 seconds
The AC heating element
is defective.
Contact the authorised customer
service.
With DC operation:
and flashing, a
beep is emitted for
20 seconds
The DC heating element
is defective.
and flashing, a
beep is emitted for
20 seconds
The burner or the cooling
unit is defective.
and bright
flashing
The burner or the cooling
unit is defective.
flashes
The temperature sensor
has no contact or is
defective.
With AC operation:
and flashing, a
beep is emitted for
20 seconds
The power supply is not
available or insufficient.
Check the AC power cable, the
power supply and the fuse.
With DC operation:
and flashing, a
beep is emitted for
20 seconds
The power supply is not
available or insufficient.
Check the DC power cable, the
vehicle battery and the fuse.
RML9335 only: Check the D+
signal on the vehicle.
With gas and automatic
operation:
and flashing, a
beep is emitted for
20 seconds
The burner flame is not
ignited.
Check the gas supply
(gas cylinder, gas valve).
Press the button once the fault
is rectified.
With gas operation:
and bright flashing
The burner flame is not
ignited.
RML93xx-O-AUS.book Seite 34 Montag, 24. Juli 2017 11:30 11

Dometic RML9330 Specifications

General

Brand	Dometic
Model	RML9330
Category	Refrigerator
Language	English