Using the refrigerator RML93xx
30
7.15 Replacing the batteries in the igniter (RML9330 only)
Proceed as follows:
➤ Using a screwdriver, press the cap on the battery igniter in 2 or 3 mm and turn it
90° to the left (A).
➤ Remove the cap (B).
➤ Remove the battery (B).
➤ Insert the new battery (type AA). Make sure the polarity is correct.
➤ Put the cap back on.
NOTE
You recognise a mounted winter cover on the LS 230 ventilation grille by
the bolts protruding from the ventilation grille (fig. h 1, page 29).
1.
2.
BA
2 – 3 mm
RML93xx-O-AUS.book Seite 30 Montag, 24. Juli 2017 11:30 11