Dometic SANIPOTTIE 970 Series User Manual

3
6
385311533
Discharge spout assembly
972, 974, 975, 976
7
385311534
385311535
Holding tank assembly (tan)
Holding tank assembly (gray)
2.6 gal./9.8 L - 972, 974, 974MSD
8
385311536
385311537
Holding tank assembly (tan)
Holding tank assembly (gray)
5.0 gal./18.9 L - 975, 975MSD, 976
9
385311538
385311539
Locking handle (tan) Locking
handle (gray)
972, 974, 974MSD, 975, 975MSD, 976
10
385311564
Mounting brackets
974, 974MSD, 975, 975MSD
11
385320006
MSD fitting
974MSD
12
385320007
MSD fitting
975MSD
OPERATION
Prepare toilet for use
1. CAUTION! With seat lid closed, pull
flush handle to open slide valve, then push
to close. This relieves air pressure that may
be created in lower holding tank due to
changes in temperature or altitude.
2. Remove water cap and fill upper tank until it
reaches about 1 inch (25 mm) below
opening. Replace cap.
3. Pull flush handle to open slide valve.
4. Pour deodorant directly into lower tank,
then close slide valve.
CAUTION! Never pour deodorant into
bowl with slide valve closed.
5. Stroke air pump about 15 times or until air
emits through relief valve on water cap.
CAUTION! Do not over-pressurize
upper tank by covering relief valve. Do
not pressurize upper tank when
disconnected from lower tank.
1. CAUTION! BEFORE EACH USE, with 2. Pull flush handle to release waste into seat lid
closed, pull flush handle to open lower tank. slide valve, then push to close. This 3. Push
flush button to rinse bowl. Push flush relieves air pressure that may be created handle to
close slide valve.

Dometic SANIPOTTIE 970 Series Specifications

General

Brand	Dometic
Model	SANIPOTTIE 970 Series
Category	Toilets
Language	English