SC26, SCT26, SC30, SC30B, SC38 Technical description
11
5.1 Control elements
Only SC30, SC30B, SC38
The desired mode is selected with the cold/hot switch (fig. 2 5, page 3).
When the cooler is connected to an AC mains supply, it can be used in two different
operating modes:
• ECO mode: the cooler consumes less energy
• MAX mode: the cooler reaches maximum cooling capacity
The desired cooling capacity is selected with the cooling capacity control (fig. 2 6,
page 3):
➤ To increase the cooling capacity, turn the cooling capacity control clockwise.
For the maximum cooling capacity turn the cooling capacity control clockwise
all the way to the stop (MAX position).
➤ To decrease the cooling capacity, turn the cooling capacity control counter-
clockwise.
To turn off the cooler, turn the cooling capacity control counterclockwise all the way
to the stop (OFF position).
When the cooler is connected to the DC socket, the cooling capacity cannot be
adjusted.
No. in
fig. 2, page 3
Description
1 USB port for power supply
2 Connection cable for DC connection
3 Connection cable for AC connection
4 Ventilation slots
5Cold/hot switch
6 Cooling capacity control
7 Handle
SC26-SCT26-SC30-SC38_OPM_EMEA16.book Seite 11 Mittwoch, 19. Juni 2019 8:51 20
To Next Page
Loading...
Need help?
General
