Dometic Smart D User Manual

EN
Dometic Smart D Operating Dometic Smart D
49
7 Operating Dometic Smart D
I
7.1 Using menus
The control panel display is a 7"touch screen. It is divided into three areas
(fig. 0, page 7):
 Status line (1): displays status reports such as time, temperatures etc,
(see chapter “Status displays” on page 52)
 Menu bar (2): Pressing a symbol will open the relevant menu (see chapter
“Status displays” on page 52)
 Info (3): displays the information and selection options for the active menu
Navigating within the menu
The main menu is displayed in normal mode (chapter “Main menu” on
page 54) You can open other menus from here. If an alarm occurs, the con-
trol panel switches automatically to alarm menu and emits a warning tone.
Navigate through the menus as follows:
➤ Press the relevant button to open the required menu.
➤ Press the
button, if you want to return to the main menu.
NOTE
The following explanations and examples refer to a system
installed with the maximum range of equipment. To use all func-
tions, additional sensors and components are necessary which
are not included in the scope of delivery.
Example:
 Dometic FreshJet air conditioning units
 Dometic chargers
 Sensors for detection of external water supply
 Additional fresh water tank
 ALDE heater
 Aerial magnet sensor
 Filling level sensors
 Water pumps

Dometic Smart D Specifications

General

Brand	Dometic
Model	Smart D
Category	Control Unit
Language	English