A Series Diesel Engine Coolant System 67
Assemble the removed parts in the reverse order of
removal.
Torque Valve:
(Alternator Link) 25.5 Nm [19 ft-lbs]
(Alternator Mounting) 49Nm [37 ft-lbs]
(Thermostat Mounting) 25.5 Nm [19 ft-lbs]
Cup Plugs – Replacement
Remove the cup plugs from the coolant passages as
shown.
Apply a bead of Loctite 277 to the coolant passage
cup plugs.
Drive the plugs in until the outer edge is flush with
the counter sink in the block.
To Next Page
Loading...
Need help?
General
