Technical Data
Dräger Alcotest 7000 | 09
Dräger Alcotest 7000
Detection basis
Electrochemical DrägerSensor
®
, 1/4" technology, alcohol-specific
Measurement range Breath alcohol concentration: 0 to 0.63 % BrAC
(Ethanol mass per minimum volume at 93 °F and 1,013 hPa)
Visual signal when measuring limits are exceeded
Sample collection Default: Automatic sample collection when minimum volume or
predefined blowing time is reached;
Passive sampling or manual triggering of sampling possible
Start-up time Approx. 3 seconds after switching on (depending on
configuration)
Display of test results After approx. 3 seconds at 0.0 % BrAC
After approx. 10 seconds at 0.1 %BrAC
Ambient operating conditions +14 °F to +131 °F; 10 to 100 % relative humidity
(non condensing); 600 to 1,300 hPa
Ambient conditions during storage -4 °F to +140 °F; 15 to 75 % relative humidity
(10 to 100% relative humidity <48 h); 600 to 1,300 hPa
Display QVGA TFT color display 320 x 240 2.4"
LEDs tricolor LEDs to help display results and warning messages
Acoustic signals Various signal tones to support display and warning messages
Memory Store the last 10,000 tests (software can be modified on request
to offer even more storage space)
Energy supply Lithium battery version (rechargeable via USB-C) or alkaline
version (3 x 1.5 V alkaline or 3x NiMH or 3x lithium primary cell
(Mignon, LR06, AA)).
Charge status shown in display; one charge/battery change is
sufficient for up to 5,000 breath tests (lithium version) or up to
1,500 breath tests (alkaline version).
Mouthpiece receptacle The Slide ’n’ Click mouthpiece or Alcotest funnel mounts on either
side
Mouthpiece Hygienic, individually packaged with tamper-proof, non-closing air
outlet
Mouthpiece ejector and spacer between mouth and device
housing
Funnel Hygienic, individually packaged with air outlets for minimizing
back-flow of expired air
Operating design Measuring functions can be performed with one button;
Navigation in menu with two menu buttons
Test for accuracy Recommended interval of 12 months
Wet gas or dry gas calibration;
Casing Impact-resistant ASA/PC
Dimensions (W x H x D), Weight (including batteries) 2.4 in x 6.8 in x 1.4 in
A7000 Li: 9.7 oz
A7000 AA: 10.1 oz
Vibration and impact resistance EN 60068-2-27, EN 60068-2-6; EN 60068-2-64
CE mark Electromagnetic compatibility
Standards EN 15964, NHTSA, Australian Standard, FDA conformity,
depending on configuration
Internal clock Warning or switch-off after expiration of calibration period
(depending on configuration)
IP protection class IP 54
Interface USB-C
Bluetooth
®
Bluetooth
®
Low Energy 5.0
To Next Page
Loading...
Need help?
General
