DSC neo HS2016 User Guide

Chapter 5.0 Access Code Types
To Open the Access Codes Menu LCD Display
1. Press [*][5]
OR
press [*] and use the scroll keys to navigate to Access Codes
and press [*].
Press (*) for <>
Access Codes
2. Enter [Master or supervisor code].
Present Tag or
Enter Code
3. Enter [User #]
OR
scroll through the list of users and press [*]. On an LED
keypad the user number will begin flashing.
Press (*) for <>
{User Label}
4. To go back to the Ready state press [#].

5.1 Adding, Changing and Deleting Access Codes
Each configured user is assigned a number as follows:
l 01-48 for HS2016/HS2016-4
l 01-72 for HS2032
l 01-95 for HS2064/HS2128
l 001-500 for HS2064 E
l 0001-1000 for HS2128 E
Access codes cannot be duplicated.
To Add or Change User Access Codes LCD Display
1. From the desired user press [*] or [1].
Press (*) for <>
Access Code
2. Enter a new 4, 6, or 8-digit access code. After entering a new
code you will be automatically returned to the previous menu,
and on an LCD display the flag is changed to P from -. On an
ICN or LED keypad the programmed user will have their
digits displayed. If a duplicate code is entered the error tone
will sound. After the code is programmed, the keypad returns
to the previous LCD display.
Enter New Code
AAAA
To Delete a User Access Code LCD Display
1. From the desired user press [*] or [1].
Press (*) for <>
Access Code
2. Press [*]. The code is deleted, and you are returned to the pre-
vious screen. The flag is changed to - from P. On an ICN or
LED keypad the programmed user’s digits will cease being dis-
played. After the code is programmed, the keypad returns to
the previous LCD display.
Enter New Code
030516

Note: Any proximity tags associated with deleted user codes will need to be re-enrolled.
- 13 -

DSC neo HS2016 Specifications

General

Brand	DSC
Model	neo HS2016
Category	Security System
Language	English