~ 8 ~
SPECIFICATIONS (All specifications +5% / -10% tolerance)
TROUBLESHOOTING
Heating element does not glow red
Stainless steel elements won’t glow
red to produce heat.
Heater is operating correctly
Do not feel heat or air flow
Check power connection to heater
Desired room temperature reached.
Thermostat will shut off heater once
desired room temperature is reached.
Unplug heater allow to cool down for
10 minutes, and then restart.
Heater has fan only setting.
Set to run on full power for heating.
Heater in cool down cycle
This is normal to disperse heat
throughout the area. Turn
thermostat up if additional heat is
desired,