Cleaning the shroud (optional)
Ensure bin is empty (as detailed
in section 6) and bin base is
open.
Press catch A to release the clear
bin from the cyclone.
Clean shroud with a cloth or dry
brush to remove lint.
Re-assembling the
clear bin
TM
Holding carry handle, fit
cyclone assembly inside the
clear bin.
Line up the front and rear
guides and push down to
click in place.
Ensure the clear bin is
secure before replacing on
the machine.
7 Cleaning the clear bin
TM
CAUTION
• Do not use detergents,
polishes, or air fresheners
to clean the clear bin
TM
.
• Do not immerse the
cyclone in water.
• Ensure bin is completely
dry before replacing.
A
Cleaning the clear bin
TM
(optional)
Ensure bin is empty and bin base
is open.
Rinse with cold water only.
Ensure bin is dry before replacing.
To Next Page
Loading...
Need help?
General
