The LCD screen
Settings menu
Change language
Change alert settings
The LCD screen shows the cleaning mode selected, remaining run time,
filter maintenance and blockage information.
To change the language on your screen, press the button and hold until the
language list appears. Release the button.
Tap the button to scroll through the language list to your preferred language.
Press and hold the button until the countdown ends.
A green tick will appear on the screen to show your language selection is
complete.
To cancel your selection, release the button during the countdown.
You can turn the alert motor pulse off. Your motor will no longer pulse but
run time alert information will continue to be displayed on the LCD screen
when your machine needs your attention.
Turning off alerts will not turn off the blockage alert pulsing. This is to ensure
you clear any blockages, preventing damage to your machine.
Tap to scroll through the settings menu. Select the ‘Alerts’ option.
Scroll to select on or off. Hold the button until the countdown ends and a tick
appears on the screen. To cancel your selection, release the button during
the countdown
English
Espanol
English
selected
Control the settings on your machine using the Selection button.
To enter the settings menu, press and hold the button until the menu screen
appears. Tap to scroll through the options available.
The Selection button
on the screen being
pressed.
Two screens, the first with
the language list and then
the tick screen to show that
the language has been
successfully changed.
The screen with an
amber warning
triangle to demon-
strate an alert.
To Next Page
Loading...
Need help?
General
