Dyson V12 Detect Slim User Manual

To check for blockages in the main body of the machine, remove the bin
following the instructions in the Cleaning your bin section and remove the
blockage.
If you cannot clear an obstruction, you may need to remove the brush bars.
Disconnect your machine from the charger before looking for blockages.
Be careful not to touch the trigger and be aware of sharp objects.
Leave your machine to cool down before looking for blockages.
Don't use your machine when looking for blockages as this could cause
injury.
Clearing blockages
Remove the bin and check for blockages in the main body of your machine.
Make sure any blockages are completely cleared and all parts are fitted
before using your machine.
If your machine detects a blockage, the motor will pulse and you won’t be
able to use your machine until the blockage has been cleared.
If you try to use your machine when the motor is pulsing, it will automatically
cut out.
Refit all parts securely before using your machine.
Clearing blockages isn't covered by your guarantee.
With the bin removed,
check for blockages, paying
particular attention to the air
inlet, located at on the right–
hand side of the machine just
below the point where the bin
joins the main body of the
machine.
With the wand
removed from the
machine, check for
blockages at both ends
of the wand.
Turn the cleaner
head over to check
for obstructions on
the brush bar and air
inlet.

Dyson V12 Detect Slim Specifications

General

Turbo	Yes
Cleaning type	Dry
Cleaning surfaces	Carpet, Hard floor
Number of settings	3
Vacuum air filtering	-
Dirt separating method	Cyclonic
Color name	Sprayed Gloss Gold /Gloss Gold
Display type	LED
Product color	Gold
Dust container type	Bagless
Power source	Battery
Charging time	4 h
Suction power	150 AW
Battery voltage	- V
Package depth	154 mm
Package width	806 mm
Package height	271 mm
Package weight	5580 g
Vacuum brushes included	Motorized brush

Weight and Dimensions

Depth	252 mm
Width	250 mm
Height	Blablabla mm
Weight	2400 g