14
5.1 Specifications
Speaker Outputs 4 to 16 ohm, 70V and 100V
Frequency Response 60 Hz - 15k Hz (± 3 dB)
Total Harmonic Distortion
<0.5% at 1kHz, 1/3 of the rated output power
Signal to Noise Ratio Line: 85dB / MIC: >72 dB
Mic Inputs MIC1, MIC2 and MIC3: 600 ohm 10-15 mV, unbalanced
AUX Inputs AUX1 and AUX2: 10k ohm 200-470 mV, unbalanced
Tone Adjustment Range Bass: 100 Hz (± 10 dB) and Treble: 12k Hz (± 10 dB)
8A AC fuse, short circuit and over temperature
Power Requirements AC 220V ± 10% 50-60Hz
Power Consumption 485W 675W 875W
Net weight 14Kg 16.5Kg 17.5Kg
Dimensions (W x H x D) 483 × 89 × 366 mm
Note: The design and specifications are subject to change without notice for improvement.
To Previous Page
Loading...
General