Eaton 200 A 25 kV class User Manual

Table10. Function codes (continued)
Parameter
Unit of
Measure
Security Level
Default Value
Key Entry Limit
To Read To Write To Reset Low High
101 Last 24 Hours
Operations
XXXXX
MM-DD-YYYY HH:MM:SS
--- View NA Admin
Reset* to
0
NA NA
•Number of operations in last 24 hours (updated hourly and on every tap change).
•This counter is reset by pressing ENTER and then ENTER again to confirm.
102 Last 30 Days
Operations
XXXXX
MM-DD-YYYY HH:MM:SS
--- View NA Admin
Reset* to
0
NA NA
•Number of operations in last 30 days (updated daily and on every tap change).
•This counter is reset by pressing ENTER and then ENTER again to confirm.
103 Current Month
Operations
XXXXX
MM-DD-YYYY HH:MM:SS
--- View NA Admin
Reset* to
0
NA NA
•Number of operations since the beginning of the current month (updated on every tap change
and reset when the clock’s month changes).
•This counter is reset by pressing ENTER and then ENTER again to confirm.
104 Last Month
Operations
XXXXX
MM-DD-YYYY HH:MM:SS
--- View NA Admin
Reset* to
0
NA NA
•Number of operations during the last calendar month (updated on every tap change and reset
when the clock’s month changes).
•If reset, this counter will remain zero until the month changes.
•This counter is reset by pressing ENTER and then ENTER again to confirm.
105 Current Year
Operations
XXXXX
MM-DD-YYYY HH:MM:SS
--- View NA Admin
Reset* to
0
NA NA
•Number of operations since January 1st of the current year (updated on every tap change
and reset when the clock’s year changes).
•This counter is reset by pressing ENTER and then ENTER again to confirm.
106 Last Year
Operations
XXXXX
MM-DD-YYYY HH:MM:SS
--- View NA Admin
Reset* to
0
NA NA
•Number of operations during the last calendar year (updated on every tap change and reset
when the clock’s year changes).
•If reset, this counter will remain zero until the year changes.
•This counter is reset by pressing ENTER and then ENTER again to confirm.
107 Enable Interval
Counters
Enabled
--- View Admin NA Enabled NA NA
•This is used to enable operations counters corresponding to FC 101 to FC 106.
Options include: Enabled; Disabled.
72
INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS MN225003EN April 2018
CL-7 Voltage Regulator Control

Eaton 200 A 25 kV class Specifications

General

Brand	Eaton
Model	200 A 25 kV class
Category	Cables and connectors
Language	English