Eaton 5PX User Manual

614-40095-00
25
1.
2.
•
•
•
Connection of RS232/USB communication port
Connect the RS232 (15) or USB (16) communication
cable to the serial or USB port on the computer
equipment.
Connect the other end of the communication cable
(15) or (16) to the USB (5) or RS232 (6)
communication port on the UPS.
The UPS can now communicate with Eatonpower
management software.
You can improve the remote monitoring and power
managment of the UPS by adding acommunication
cardcompatible with the 5PXproduct.
Characteristics of the contact RS232 communication port
Contact characteristics
(optocoupler)
Voltage: 48 V DC max
Current: 25 mA max
Power: 1.2 W
Pin Signal Direction Function
1 Bat low Output Low Battery Output
2 TxD Output Transmit to external device
3 RxD Input Receive from external device
4 I/P SIG Input -
5 GNDS -
Signal Common tied to chassis
6 PNP Input Plug and Play
7 UPS OK Output UPS OK
8 BAT mode Output UPS on battery mode
9 +5V Output
Power supply for external
signal or options

Eaton 5PX Specifications

General

Output Voltage	230V
Topology	Line-Interactive
Efficiency	Up to 99%
LCD Display	Yes
Typical Recharge Time	3 hours to 90%
Operating Temperature	0°C to 40°C
Form Factor	Tower
Battery Type	Sealed, lead-acid
Communication Ports	USB, Serial
Output Frequency	50/60 Hz
Input Voltage Range	160-294V
Storage Temperature	-15°C to 45°C
Relative Humidity	0% to 95% non-condensing
Audible Noise	<45 dB at 1 meter
Dimensions (HxWxD)	Varies by model
Weight	24 kg