Form 4D Microprocessor-based pole-mount recloser control
installation and operation instructions
Figure 1. Form 4D microprocessor-based pole-mount recloser control
Applicable to the following serial numbers:
Type KME4DPA control: serial number CP571231477
and above, applies to Form 4D control for use with W,
VS, and auxiliary-powered NOVA reclosers.
Type KME4DPB control: serial number CP571231527
and above, applies to control-powered NOVA Form 4D
control for use with control-powered reclosers.
Reclosers
MN280049EN
Effective September 2017
Supersedes January 2012 (S280-104-1)