Need help?Do you have a question about the Eaton Network-MS and is the answer not in the manual?
General| Manufacturer | Eaton |
|---|---|
| Model | Network-MS |
| Category | Network Card |
| Interface | Ethernet |
| Data Rate | 10/100 Mbps |
| SNMP Traps | Yes |
| Web Interface | Yes |
| Compatibility | Eaton UPS systems |
| Protocols | HTTP, SNMP |
| Communication | SNMP |
| Connectors | RJ45 |
| Power Supply | Powered by UPS slot |
Overview of the Eaton Network Solution, its purpose, and functions.
Details on the Network Management Card's features and compatibility.
Specifications like hardware characteristics, EMC compatibility, and configuration details.
Instructions for unpacking the installation kit and verifying contents.
Step-by-step guide for installing the card into a UPS.
Steps to configure the IP address and network settings for the card.
Procedure to verify the card's operational status after configuration.
Tips for configuring the web browser for optimal viewing of UPS status.
Overview of UPS monitoring and management features via the browser interface.
Configuration of UPS operating parameters for battery mode and power restoration.
Description of using Telnet/SSH/CLI interfaces for the Network Management Card.
List of parameters accessible via Telnet, SSH, or CLI interfaces.
Function to restart the card from the boot.
Accessing and modifying network settings via RS232.
Lists of alarms, UPS events, and system alarms.
To Next Page
