To Next Page

To Previous Page

成都亿佰特电子科技有限公司 ECAN-E01S 用户使用说明

书

UDP Server

(1) UDP Server means that the source IP address is not verified on the basis of ordinary UDP. After each UDP data

packet is received, the destination IP is changed to the data source IP and port number. When sending data, it is sent

to the most recent communication. That IP and port number.

(2) This mode is usually used in data transmission scenarios where multiple network devices need to communicate

with the module and do not want to use TCP due to the high speed and frequency.

Note: UDP Server cannot actively send data, only after receiving data, can it send data to the IP and port that have

recently interacted with data.

→CAN Part

4.1.2. Relay enable

The device has the function of two-way CAN mutual transmission, that is, the relay function. When the device is in

relay mode, the data received by CAN1 on its network will be sent to the network where CAN2 is located, and the

data received by CAN2 on its network will be sent to the network where CAN1 is located.

Note: When the baud rates of the two CAN networks are different, it should be noted that the high baud rate needs

Ebyte ECAN-E01 User Manual

Questions and Answers: