6
emission Data
DesCRiption
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restric-
tions, guide bar and saw chain installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
Contents
1 - Power Head
1 - Guide Bar
*1 - Kick Guard
1 - Hex Head Bolt
1 - Hex Nut
*1 - Saw Chain
1 - Instruction Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Limited Warranty Statement
1 - T-Wrench
1 - Echo Power Blend
TM
2-stroke oil sample
* The machine may be delivered with guide bar and saw chain
assembled.
impoRtant enGine infoRmation
enGine family: 6eXhs.0334Ca DisplaCement: 30.1 CC
emission ComplianCe peRioD: 300 houRs
THIS ENGINE MEETS U.S. EPA PH2 AND 2005 - 2006
CALIFORNIA EMISSION REGULATIONS FOR SOREs.
REFER TO OWNER’S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
emission ContRol
EPA Phase 2/California Tier II
The emission control system for these engines are
EM/TWC (Engine Modication and Catalyst).
An Emission Control Label is located on the
engine. (This is an EXAMPLE ONLY, information
on label varies by engine FAMILY).
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer cer-
tifying the engine emissions output meets applicable California and/or U.S. EPA emissions regulations,
provided that approved maintenance procedures are followed as listed in the Maintenance Section of
this manual.
*
To Next Page
Need help?
General