Echo CS-3400 User Manual

17
Starting the cold engine
A: Starter handle
1. Chain brake ACTIVATED position
2. Ignition switch (ON)
3. Choke control knob (CLOSE)
4. Purge bulb (Primer pump)
5. Choke control knob (OPEN)
 Fill the fuel tank with fuel mixture.
It is not permitted to fill fuel above the shoulder level of fuel tank.
 Fill the chain oil tank with lubricant.
 Press hand guard forward.
(Chain brake ACTIVATED position)
 Turn ignition switch forward, to position "RUN".
 Pull choke control knob all the way out (START position).
 Push primer pump until fuel is visible in primer pump.
 Securely hold the chain saw.
When starting the chain saw place the unit on a flat ground and hold the front handle with
left hand and hold firmly the rear end of rear handle with right knee and pull starter handle
with right hand.
 Make sure guide bar and saw chain are not touching anything when strarting the saw.
 Pull starter handle several times until first firing sound is heard.
 Push choke control knob all the way in (RUN position).
 Pull starter handle again.
NOTE
Do not pull starter rope out to the maximum position.
Do not allow starter handle to snap back against the casing.

Echo CS-3400 Specifications

General

Brand	Echo
Model	CS-3400
Category	Chainsaw
Language	English