OPERATION CS-355T
34 X7503323507
© 01/2021 ECHO Incorporated
Note: If engine does not stop, move the control lever to the Cold
Start position to apply full choke to stop engine. Return
the unit to your authorized dealer to check and repair
ignition switch before starting the engine again.
Checking Chain Tension
Do not operate with a loose chain. Serious injury can occur.
Chain tension should be checked
frequently during work and
corrected as necessary.
Chain Lubrication Test
Hold the chain just above a dry
surface and open the throttle to half
speed for 30 seconds.
A thin line of “thrown” oil should be
seen on the dry surface.
Cutting Instructions
General
◆ This chain saw is designed for cutting wood. Do not cut
metal, plastic or any non-wood material
.
◆ Wear suitable hearing
p
rotection such as
earmuffs or earplugs to
protect agains
t
ob
jectionable or
uncomforta
ble loud
no
ises.
To Next Page
Loading...
Need help?
General
