18
Cleaner cover knob
Spark plug
Air cleaner cover
Air filter
Cylinder cover
Air filter cover
AIR FILTER
• Check before every use.
• Loosen cleaner cover knob and remove air
cleaner cover and filter.
• Brush off dust lightly, or clean with compressed
air, or replace the air filter.
• Reinstall filter and cover.
CYLINDER FINS
• Check periodically.
• Clogged fins will result in poor engine cooling.
• Remove dirt and dust from between fins to let
cooling air pass easily.
SPARK PLUG
• Check periodically.
• The standard spark gap is 0.65 mm (0.026 in).
• Correct the spark gap if it is wider or narrower
than the standard gap.
• Fastening torque : 15 to 17 N • m
(130 to 145 in lb).
←←
←←
←
→→
→→
→
0.65 mm (0.026 in)
To Next Page
Loading...
Need help?
General
