EasyManuals Logo
Home>Echo>Trimmer>HC-2020

Echo HC-2020 User Manual

Echo HC-2020
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
HC-2020 MAINTENANCE
X7702245301 33
© 11/19 ECHO Incorporated
Carburetor Adjustment
The blades must not move at idle, otherwise serious personal
injury may result. Periodic carburetor adjustment may be
necessary to assure blades do not move at idle.
If blades move, readjust carburetor according to these
instructions, or see your ECHO Dealer.
Engine Break-In
New engines must be operated a minimum duration of two tanks of fuel
break-in before carburetor adjustments can be made. During the break-in
period your engine performance will increase and exhaust emissions will
stabilize. Idle speed can be adjusted as required.
High Altitude Operation
This engine has been factory adjusted to maintain satisfactory starting,
emission, and durability performance up to 1,100 feet above sea level (ASL)
(96.0 kPa). To maintain proper engine operation above 1,100 feet ASL the
carburetor may
need to be adjusted by an authorized ECHO service dealer.
If the engine is adjusted for operation above 1,100 feet ASL, the
carburetor must be re-adjusted when operating the engine below
1,100 feet ASL, otherwise severe engine damage may result.
Level 2.
Note: Every unit is run at the factory and the carburetor is set in
compliance with emission regulations. Carburetor
adjustments, other than idle speed, must be performed by an
authorized ECHO dealer.
Parts Required: None

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo HC-2020 and is the answer not in the manual?

Echo HC-2020 Specifications

General IconGeneral
BrandEcho
ModelHC-2020
CategoryTrimmer
LanguageEnglish

Related product manuals