Echo PB-580 H/T User Manual

24 X7505200600
© 11/2014 ECHO Inc.
OPERATION PB-580 H/T
Intake Cover (optional)
In cold weather, intake cover can be installed for operator
comfort. Intake cover is not included.
1. Remove back cushion (A) from frame.
2. Install intake cover (B) on frame over air intake.
3. Install back cushion (A) to frame over intake cover.
Note: Blower performance may be reduced slightly.
Adjust the Harness
1. Loosen upper and lower buckles (A), then put blower on
your back.
2. Pull strap (B) downward to adjust position of blower.
3. Pull (C) to adjust angle between your back and the blower.
A
B
A
B
C

Echo PB-580 H/T Specifications

General

Brand	Echo
Model	PB-580 H/T
Category	Blower
Language	English