EasyManuals Logo
Home>Echo>Blower>Pro Attachment ES-210

Echo Pro Attachment ES-210 User Manual

Echo Pro Attachment ES-210
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
D
E
5. Align grooves in discharge elbow with pegs on blower, and slide
elbow (D) on to blower. Turn elbow counterclockwise to lock in
place. Elbow must angle back toward operator position as shown.
6. Place debris bag opening over ared end of elbow, and cinch bag
(E) securely with Velcro strap.
op e r a T I o n
NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor
performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage
section of this manual.
WARNING
Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit. Blower housing may contain shredder blades and
other sharp edges that can cause serious injuries if touched, even if engine is off and blades are not moving. Wear
gloves to protect hands from sharp edges and hot surfaces.
WARNING
Operation of this equipment may create sparks that can start res around dry vegetation. This unit is equipped with
a spark arrestor and a spark arrestor may be required. The operator should contact local re agencies for laws or
regulations relating to re prevention requirements.
f u e l

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo Pro Attachment ES-210 and is the answer not in the manual?

Echo Pro Attachment ES-210 Specifications

General IconGeneral
BrandEcho
ModelPro Attachment ES-210
CategoryBlower
LanguageEnglish

Related product manuals