Echo SRM-230 User Manual

24 X7532098207
© 2/2014 ECHO Inc.
MAINTENANCE SRM-230
2. Remove muffler cover (A).
3. Remove top guard (B).
4. Remove engine cover (C).
DO NOT use a metal scraper to remove dirt from the cylinder fins.
5. Use brush (D) to remove dirt from the cylinder fins.
6. Remove grass and leaves from the grid (E) between the
recoil starter and fuel tank.
7. Assemble components in reverse order.
Exhaust System
Spark Arrestor Screen
Level 2.
1. Remove spark plug lead.
2. Remove muffler cover (A).
3. Place piston at Top Dead Center (TDC) to prevent
carbon/dirt from entering cylinder.
4. Remove spark arrestor screen cover (B), gaskets (C), and
screen (D) from muffler body.
5. Clean carbon deposits from muffler components.
Note: When cleaning carbon deposits, be careful not to damage the catalytic element inside muffler.
6. Replace screen if it is cracked, plugged, or has holes burned through.
7. Assemble components in reverse order.
Parts Required: Spark Arrestor Screen, Gasket
A
B
C
D
E
A
C
B
D

Echo SRM-230 Specifications

General

Brand	Echo
Model	SRM-230
Category	Trimmer
Language	English