GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
27
NYLON LINE REPLACEMENT
Level 1
Tools Required: None
Parts Required: ECHO 0.105 in. Nylon Trimmer Line 15 m (50 feet)
long.
1. Shut engine off. Lay unit on the ground with head assembly up.
2. Hold head firmly and push in cover tabs (A) to remove cover (B)
and spool (C).
3. Use one piece of nylon line (D) and thread through the molded loop
(E) on the spool spindle until ends are even.
A
B
C
E
D