28
l u b r I c a t I o n
Level 1.
Tools Required: 8 & 13 mm Open End Wrench, Screwdriver,
Clean Rag.
Parts Required: POWER BLENDX
TM
8 oz. (P/N 91014) or Lithium
Base Grease.
Gear Housing
1. Clean all loose debris from gear box.
2. Remove plug (A) and check level of grease. Grease should ll gear
case to bottom of grease plug hole.
3. Add grease if necessary using manual grease gun or squeeze-type
tube. Do not use high pressure grease gun. DO NOT over-ll.
A
To Next Page
Loading...
Need help?
General
