Ecodos-L, Ecorinse-L, Ecoset-L - 3 - Rev 3.12-07
1 General
This manual contains all important information on the function, the operation, the setting,
the installation and maintenance and repair of the ECODOS-L / ECORINSE-L /ECOSET-L
dosing units.
The systems are speed/timed and conductivity controlled dosing units for liquid/solid deter-
gents and liquid rinse products. They are designed for the use in commercial dishwashers.
All safety information and emphasised points are always to be observed!
1.1 Scope of warranty
Operational safety, functionality and performance of this unit is only guaranteed by the
manufacturer under the following conditions:
- maintenance and repair must be performed by authorized personnel.
- the unit is only used in accordance with the contents of this Instruction Manual
- only original spare parts are used for service and repair
- only approved Ecolab products are used.
In addition, the general warranty and service conditions of the company
ECOLAB Engineering GmbH are applicable.
1.2 Applicable regulations
The unit was based on the following regulations:
89/336/EWG “Electromagnetic compatibility“(EMV Guideline)
1.3 Transport damage
If, when unpacked, the unit is found to have suffered damage in transit, it must not be in-
stalled.
1.4 Contact address / manufacturer
ECOLAB Engineering GMBH
Raiffeisenstraße 7
D-83313 Siegsdorf
Phone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
E-mail:
Lang-Mailbox@ecolab.com
To Next Page
Loading...
Need help?
General
