EasyManuals Logo
Home>Ecolink>Accessories>Z-Wave Plus Flood/Freeze

Ecolink Z-Wave Plus Flood/Freeze User Manual

Ecolink Z-Wave Plus Flood/Freeze
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
© 2018 Ecolink Intelligent Technology Inc. PN H214104 Rev - A
Association
This sensor has one Association groups of 5 nodes. Group one is a lifeline group who will receive unsolicited messages relating to flood/freeze notifications, case
tampering notifications, low-battery notifications.
Network Wide Inclusion
This sensor also supports Network Wide Inclusion such that the Sensor can be included into the Z-Wave network over the mesh network and not directly near the
main controller. This mode is automatically activated after regular inclusion was not successful
Wake-Up Notification
The sensor will wake up every so often and when the case is closed to send a Wake-Up Notification to allow the life line master node controller that the sensor is
now available for any queued messages that the controller may have for the sensor. The time between Wake-Up Notifications can be configured with the Wake-
Up Notification command class to be between 1 hour and 1 week with interval steps of 200 seconds. The sensor will also send a wakeup notification whenever
the case is closed.
ENGLISH
GUARANTEE TERMS AND CONDITIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ecolink Z-Wave Plus Flood/Freeze and is the answer not in the manual?

Ecolink Z-Wave Plus Flood/Freeze Specifications

General IconGeneral
BrandEcolink
ModelZ-Wave Plus Flood/Freeze
CategoryAccessories
LanguageEnglish

Related product manuals