53
CrossFire
®
Technology [AMD Dual Graphics] Support
Chapter 5
CrossFire
®
Technology (AMD Dual Graphics) Support
CrossFire
®
Technology
The CrossFire
®
technology provides significant display performance boost to AMD-
based systems by inserting the external PCI Express graphics card and enabling
both the discrete GPU and the AMDA55 graphics core to render simultaneously in
Hybrid CrossFire
TM
mode.
Follow the steps below to start the CrossFire
®
technology.
1. Insert a graphics card (which can be used for CrossFire
®
technology, such as
HD6670 series) into the PCIEX16 slot.
Make sure that the card is properly seated on the slot.
2. For CrossFire
®
, you must enter the BIOS, set the Initate Graphic Adapter in
Advanced Menu to IGD. Then press F4 to save the configuration and exit the BIOS.
* For reference only
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
North Chipset Configuration
IGD Memory [Auto ]
Initate Graphic Adapter [IGD]
CrossFire [Enabled]
CrossFire: Output is IGD Video
Main Advanced Chipset M.I.B.III Boot Security Save & Exit
lk
F1:General Help
+/- : Change Opt.
Enter : Select
mn
:Select Screen
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
:Select Item
To Next Page
Loading...
Need help?
General
