Chapter 3
A75F2-M2 USER MANUAL
39
Press <Esc> to return to the Advanced Menu page.
Scroll to this item and press <Enter> to view the following screen:
Main Advanced Chipset M.I.B III Boot Security Exit
Parallel Port Configuration
Parallel Port Configuration
Parallel Port Enabled
Device Settings I0=378h; IRQ=5;
Change Settings Auto
Device Mode Standard and Bi-dir...
Enabled or Disabled
Parallel Port (LPT/LPTE)
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
F2: Previous Values
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Device Mode (Standard and Bi-dir...)
Use this item to select device mode.
Press <Esc> to return to the Super IO Configuration page.
To Next Page
Loading...
Need help?
General
