EasyManuals Logo
Home>ECS>Motherboard>A75F2-M2

ECS A75F2-M2 User Manual

ECS A75F2-M2
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
63
A75F2-M2 USER MANUAL
Chapter 5
The following Windows Setup screen appears listing both drivers:.
Figure 1.12 Windows Setup—AMD drives listed
Note: Each time you add a new hard drive to a RAID array, the RAID driver
will have to be installed under Windows once for that hard drive. After that,
the driver will not have to be installed.
Figure 1.11 Windows Setup—Selected SCSI Adapter
S=Specify Additional Devices ENTER=Continue F3=Exit
Windows Setup
---------
Setup will load support for the following mass storage device(s):
ATI AHCI Compatible RAID Controller-x86 platform
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storag device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
ENTER=Select F3=Exit
Windows Setup
---------
You have chosen to configure a SCSI Adapter for use with windows£¬
using a device support disk provided bu an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ATI AHCI Compatible RAID Controller-x86 platform
ATI AHCI Compatible RAID Controller-x64 platform
a Insert the floppy that has the RAID driver, press S, then press Enter.
The following Windows Setup screen appears:
b Select “ATI AHCI Compatible RAID Controller-x86 platform” and press
Enter for 32-bit OS or Select “ATI AHCI Compatible RAID Controller-x64
platform” and press Enter for 64-bit OS.
5. Press Enter to continue with Windows XP Installation.
Be sure to leave the floppy disk inserted in the floppy drive until the blue
screen portion of Windows XP installation is completed, then take out
the floppy.
6. Follow the instructions on how to install Windows XP.
After Windows XP is completely installed, it is recommended that you
install the ForceWare software in order to access the FastBuild RAID Man-
agement tool.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECS A75F2-M2 and is the answer not in the manual?

ECS A75F2-M2 Specifications

General IconGeneral
BrandECS
ModelA75F2-M2
CategoryMotherboard
LanguageEnglish

Related product manuals