Chapter 3
BSWI-D2 USER MANUAL
27
Smart Fan start PWM TEMP (°C) (45)
This item is used to set the start temperature of the smart fan.
DeltaT (3)
This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.
Smart Fan Slope PWM value (10)
This item is used to set the Slope Select PWM of the smart fan.
Press <Esc> to return to the PC Health Status page.
• SoC Temperature
• System Temperature
• CPU Fan Speed
• System Fan Speed
• CPU Voltage
• DIMM Voltage
• +12V
• +5V
• +3.3V
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,... etc.
Press <Esc> to return to the Advanced Menu page.
This item is used to monitor limit temperature when fan is full speed.
Fan Full Limit Temp (°C) (52)
To Next Page
Loading...
Need help?
General
