ECS H61H2-M3 User Manual

38
Using BIOS
 Serial Port 0 Configuration
This item shows the information of the super IO chip.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F 8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Super IO Configuration
Scroll to this item and press <Enter> to view the following screen:
ff
ff
f
ff
ff
f
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Change Settings [Auto]
Super IO Configuration
Serial Port 0 Configutation
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Set Parameters of Serial Port
0 (COMA)
ff
ff
f
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
Main
Advanced Chipset M.I.B III Boot Security Exit
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
Main
Advanced Chipset M.I.B III Boot Security Exit

ECS H61H2-M3 Specifications

General

Brand	ECS
Model	H61H2-M3
Category	Motherboard
Language	English